Windview Homeowners Association

What Windview Homeowners Association's governing documents say

Windview Addition is a standard single-family home subdivision in Colleyville, TX, governed by a homeowners association. These amended covenants run with the land and bind all lot owners. The rules focus on maintaining a private residential character with strict architectural oversight.

• Use restrictions: Lots may be used only for private single-family residential purposes. No retail businesses, hospitals, sanitariums, theaters, saloons, or churches are allowed. Only one residence per lot, and lots cannot be subdivided.
• Architectural review: All construction, additions, or alterations require prior written approval from the Architectural Control Committee (ACC). Plans must be submitted, and the ACC must approve or disapprove within 60 days of acknowledging the request; otherwise, the owner may proceed. Decisions can be appealed to the Board of Directors.
• Roof materials: Roofs must be approved by the ACC. Acceptable materials include wood shingle, slate, tile, metal, built-up roof, or composition shingles. Composition shingles must be laminated/dimensional, class A fire rated, and either minimum 340 lbs per square or carry a 40-year warranty.
• Fence height limits: Fences or walls may not exceed 6 feet above ground, unless part of a building. With ACC approval, the limit can be increased to a maximum of 8 feet on a case-by-case basis.
• Vehicle and equipment storage: Boats, trailers, mobile homes, campers, and similar wheeled vehicles may not be stored where visible from the street for more than 24 hours, except with ACC approval. No livestock or poultry are allowed.
• Outbuildings: Small storage buildings (e.g., for lawn equipment) must be placed in the backyard. Size, materials, and location require prior ACC approval.
• Garage requirements: Each residence must include at least a 2-car garage with a minimum width of 24 feet, unless the ACC approves a deviation.
• Ridge height limit: The ridge height of any residence may not exceed 31 feet, measured from the front setback property line elevation.

Plain-language summary generated from the governing documents on file for this community. It may be incomplete and is not legal advice — read the full documents below or consult the official recorded versions.